MyPhone A848 Duo Firmware is here, for now this is the latest update stock rom you can flash to fix some common software problem like dead boot, boot loop, stuck or hang on start up logo, infected by virus or pop ads, unfortunately error and others, flashing firmware is the best solution, download and follow the instruction below.
FYI what is Android Firmware and Stock ROM
Why Firmware is the best solution
- Infected Virus – Also known as Monkey Virus, It is when you connect to Internet, there is automatically download and install unknown apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
- Unfortunately Error – This is when you open some apps it will popup Unfortunately, App has stopped this is due to downloaded malware app. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
- Stuck or Hang in Logo – The reason for this is either when you install incorrect Rom or Encounter problem in Operating System. Try to hard reset first but if still stuck, then flashing firmware is also the solution
- Too Many Pattern Attempts or forgot password – This is just an alternative solution if you cannot hard reset your android phone.
- Dead boot – Another caused of flashing incorrect ROM will lead to dead boot. Make sure you are flashing the right ROM (Firmware) for your Phone. If you think below is the right firmware for your device then nothing to worry.
- Boot Loop – The device keep rebooting when you turned it on, Unless your power switch has been damage, Flashing new ROM will fix it.
- FRP – It will keep asking you to enter your email accounts, It says Verify Your Account. In this problem, If you can’t bypass Using NCK, (Follow this) then flash the firmware below and make sure you select Format all + download.
- Privacy Protection Password – You should try first Remove Privacy Protection Password. If still won’t work, then flash the firmware below and make sure you select Format all + download.
- And any software problem.
Things to consider before flashing
- Back Up Important data – We strongly recommend this to avoid further problem. Complete flashing Rom will erase all and bring back to the default app. All files saved in internal storage will erase like Contacts, Photos, Messages, Accounts, and installed third party application.
- Battery Must be charged – Recharge your battery at least more than 30% to avoid interruption during flashing.
- Windows PC and USB Cable – Windows 7 32/64 bit is our recommended PC for compatibility of drivers below.
- Back Up Installed Firmware if necessary – This is optional if you want to restore your firmware after flashing. Doing this back up need some special tools depend on your mobile chip set.
Know your Phone Model
|You can also check your phone model number at Settings>About Device|
Download MyPhone A848 Duo Firmware
How to flash Android phone using SP Flash tool
What we need?
- Firmware/ROM, SP Flashtool and MTK Drivers
- USB Cable
- Smartphone with 30 to 50 percent battery charged
Install Driver using Auto Installer Driver
Download Driver Auto Installer v1.1236.00
- After you download and extract, open the folder and you will see Install.bat
- Run and it will appear Windows Security window
- Click Install this driver software anyway
- It will appear many times and just click the same button.
Install Driver Using MediaTek USB VCOM drivers
Flashing Stock Rom in SP Flash tool
- Download Latest SP Flash tool here and extract to your desired location.
- Open the extracted file folder and run flash_tool.exe.
- On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
Follow the screenshot below in choosing android scatter file.
Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.
In flash tool Select Download Only, Here is the step to connect.
-Click Download button in Flash Tool.
-In your phone turn off first, or remove battery (if removable) because turn off is a must.
-Then Press Volume up or Down or you can press them both Then insert USB Cable Then Insert back the Battery.-If you see a Red Progress bar then the phone is detected.
if it continue to Yellow Progress bar then proceed to step 7.
You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.
And finally, it will popup a Download OK, that means the flashing new firmware is successful.
For Video tutorial, watch the video below.
Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
NOTE: Starting up for the first time may took long. Perform Hard Reset if necessary.
PMT changed for the ROM; it must be downloaded. If you don’t see this warning skip this and proceed to step 7.
to solve this, just follow the suggestion, Please Select “Format All + Download” and try again the step 6.
NOTE: Choosing Format all + download may have a chance to encounter Invalid IMEI, but the solution provided below.
Troubleshooting After Flash
Forgot Email Account?
FOR INVALID IMEI or Null IMEI
Performing Hard Reset After Flash.
Here the basic step in performing hard reset after flash. The advantage of this is to completely delete all installed apps and clear user data and cache, follow the step.
- Turn off your device.
- Press Volume and Power button at once (Either volume up or volume down or both)
- The device will turn on and you will see the Recovery Menu. Use volume key to select Wipe data / cache.
- Press Power button to confirm.
Make sure you follow carefully the instruction above in flashing, If you think this post is useful, please give us 5 star, And if you need help in flashing, you can comment below to help you about this Firmware. You can allso message us in our facebook page.
3 thoughts on “MyPhone A848 Duo Firmware Stock ROM”
yun meron ng stockrom salamat sa pag update BOSS 🙂
Master Vir Lodi Idol Baka Po Meron Kang Firmware Ng Myphone agua Hail Yung Tested Po? Kung Meron Po Paano Kita Mababayaran? Andami Ko Na KAsing Tinest NA Firmware Sa Deadboot Na Phone Ko Puro BROM ERROR (No SPACE) Po Kaw LAng Po PAg-asa Ng Maralitang Pilipino Sa Buong Mundo. Salamat Po Ng Marami! Godbless
Salamat sa pag feedback sir, Madalas po pag ganyan hardware problem na, pero subukan mo parin i Flash yung pangalawa dito sa MyPhone Agua Hail Firmware.
Comments are closed.