Myphone My76 DTV Tested Firmware / Stock Rom

Myphone My76 DTV stock rom
Myphone My76 DTV Android 6.0, Marshmallow

Here is the updated firmware for your Myphone My76 DTV, this backup stock rom comes from working My76 DTV, this is converted to pac file to be able to flash using ResearchDownload or Upgrade download.

Why we flash a new firmware for Myphone My76 DTV? Here are common software problem of android phone that can be fix through flashing new firmware, and remember that flashing can only fixed software problem, this firmware is tested and here are the following software problem that can be fix in flashing new firmware:

  • Myphone My76 DTV Infected Virus – Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Myphone My76 DTV Unfortunately Error – This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Myphone My76 DTV Stuck or Hang in Logo – The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  • Myphone My76 DTV boot loop.

Download MyPhone MY76 DTV Firmware

Thanks and credit to MOXX

Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
    – To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. Then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don’t have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start

  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it took more than 15 minutes then I suggest to perform a hard reset.

46 thoughts on “Myphone My76 DTV Tested Firmware / Stock Rom”

  1. ayaw talaga sir e.. matapos ko ma DL dun google tas ginamitan kopa ng IDM tas pagkatapos ma extract may error na nkalagay!! nag PM ako dun sa page nyu sa FB papansin nlang

  2. The password and the firmware is still working. for those who encounter wrong password, please manually type "moxxxgsmsandwich" or try to download in other pc.

  3. Sir ayaw po maginstall ng MTP USB Drive. kaya po cguro langing failed:uart send error. ganun po kac nangyayare sakin ii. pano po kaya sya mafifix? salamat po.

  4. Kung success yung flash, ok na din dapat yang phone kung walang hardware problem, Antayin mo lang, usually matagal lang magstart pag first time or hard reset mo lang after flash para sure

  5. I understand you bro, we all want that, may purpose ang nagbackup kung bakit may password, pero we make our part also na ilagay ang tamang password dito. redownload mo lang kung error kasi nagcocorrupt minsan at di tanggapin ang password. tested working yung pasword. salamat sa pagIntindi.

  6. Thanks po dito, gumana sa akin. Paala lang sa mga nagflash na di gumana sa kanila, kapag isasalpak niyo na yong usb port sa cellphone niyo ang pindotin niyo lang ay volume up at power button saka wag niyon g tatanggalin yong battery. Ganyan yong ginawa ko, gumana naman siya.Nakailang try and error din ako dahil lagi ngang unplug yong usb ko.

  7. Hi sir, dalawang beses ko ng nadownload yung pac file pag ni load ko na sya sa upgradedownload, lage na lang Load bin pocket failed. Or too small or might be corrupted.

  8. Okay na yung issue na pocket failed sir, ibang version ng upgradedownload yung ginamit ko. Kaya lang ang problema ko na naman ayaw ma-read ng computer yung android ko gamit yung spreadrum usb driver.

Comments are closed.