For those looking for Cherry Mobile TOUCH XL 2 here is the tested firmware for you,
![]() |
Cherry Mobile TOUCH XL 2 Android 6.0 Marshmallow |
- Cherry Mobile TOUCH XL 2 Infected Virus
- Cherry Mobile TOUCH XL 2 Hang on logo
- Cherry Mobile TOUCH XL 2 Dead boot
- Cherry Mobile TOUCH XL 2 Unfortunately error
Download firmware MT6580__CHERRY__Touch_XL_2__Touch_XL_2__6.0
firmware password is [email protected] Thanks and credit ti preloader88.
How to flash Android phone using SP Flash tool
What we need?
- PC
- Firmware/ROM, SP Flashtool and MTK Drivers
- USB Cable
- Smartphone with 30 to 50 percent battery charged
Driver Installation
Install Driver using Auto Installer Driver
- After you download and extract, open the folder and you will see Install.bat
- Run and it will appear Windows Security window
- Click Install this driver software anyway
- It will appear many times and just click the same button.
Install Driver Using MediaTek USB VCOM drivers
Flashing Stock Rom in SP Flash tool
- Download Latest SP Flash tool here and extract to your desired location.
- Open the extracted file folder and run flash_tool.exe
- On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
-
Follow the screenshot below in choosing android scatter file.
Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
-
After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.
-
In your phone turn off first, or remove battery (if removable) because turn off is a must.
In flash tool Select Download Only Then click Download button
In your phone Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
After you see detected proceed now to step 7. -
You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.
-
And finally, it will popup a Download OK, that means the flashing new firmware is successful.
Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
NOTE: Starting up for the first time may took long.
PMT changed for the ROM; it must be downloaded. If you don’t see this warning just proceed to step 7.
to solve this, just follow the suggestion, Please Select “Format All + Download” Scene and try again the step 6.
I get an Error
ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0)
[HINT]
Please check your load match your target which is to be downloaded.
SP Flash tool v5.1648.00
When i press volume down the phones detect as MediaTek USB Port
I think this firmware is not the right firmware for your phone
Thats is weird when my phone is a Cherrymobile Touch XL 2 :/
my phone turns black but everything seems fine,, but black light only,,help me pls
izrael cab
It seems like there is a proble in your Display.
Thanks its working!
thank you for this firmware master, it is working perfectly!
cant detect my touch xl 2.. there's no progress after following step no. 6.. what to do?
Make sure you install the driver properly
help please, where can i download the Touch xl2 rom
its says power up too early BROM ERROR: S_BROM_CM_STARTCMDFAIL (2005)
HELPPPP plssss
board problem
press up + down then batt
what is the real password?
This approach quite still an excellent live which i for that matter quite really liked perusing. This isn't conclusively daily which i are the option to evaluate an important problem. Graphics Design