Tablet M706-MB-V5.2 MT6572 Tested Firmware No Password

by

Here are collection of stock rom for M706-MB-V5.2 tablet for Modoex, Samsung Tablet Clone, and Lenovo tab. The board id look like this

There are may types of tablet but the same board id, so if your tablet brand is not listed below, you can try the all firmware. all of this firmware is tested by many expert technician. I tried three firmware also and the second firmware is work for the lenovo tab of my client.

NOTE: Flashing firmware may cause deadboot, bluescreen, white screen or scramble display, that means that the firmware you downloaded is not compatible to your tablet. to solve this you need to try another firmware. all firmware below is collected and tested for M706-MB-V5.2 15.52 and 16.17.

Firmware for Modoex tablet m706 mb v5.2​

Here is a confirmed tested firmware by Prince Ace, Tatzkie, Jaytech3310 and more. To ensure that your tablet is exact firmware, see this screenshot by tatzkie, Note that your tablet should be look like this before you flash the firmware.
 

Download Firmware for Modoex Tablet.


Firmware for Samsung tablet m706-mb-v5.2​

This firmware is tested for many samsung tab clone, including Odotpad 7″3g Tab M-series Banana-7, Samsung Galaxy Edge Max (Clone) Model: M902. You can try also this for other brand of tablet like lenovo as long as the board ID is the same. this one is tested by me.

Download Firmware. Thanks and credit to Duke

Here is another firmware for samsung clone tablet, use this if the above firmware doesn’t work or you encounter some problem like bluescreen or no powering on. this firmware tested on ENET M706-MB-V5.2 ENET e733 3g 8gb.

Download another Firmware. Thanks and credit to jerry

For some clone tab that not work in above firmware, you can try this, tested in Samsung Galaxy Tab S Clone also same board id M706-MB-v5.2.

Download Firmware for Samsung Galaxy Tab S. Rar Password is: gsmsandwich.Rain​

Download Firmware for GALAXY NOTE 10 G3 clone MT6572. Thanks and credit to Hmanogangcar


How to flash Android phone using SP Flash tool

What we need?

  • PC
  • Firmware/ROM, SP Flashtool and MTK Drivers
  • USB Cable
  • Smartphone with 30 to 50 percent battery charged

    Driver Installation

    Flashing phone need to install driver first in order to connect and to be able to flash firmware, we will be install MTK driver in to different way, choose only one by using Auto Installer Drivers or MediaTek USB VCOM drivers. 

    Install Driver using Auto Installer Driver

    • After you download and extract, open the folder and you will see Install.bat 
    • Run and it will appear Windows Security window
    • Click Install this driver software anyway 
    • It will appear many times and just click the same button. 

    MTK Driver Auto Installation

    Wait for CMD window to display Install complete that indicate that driver installation is successful.

    Driver auto installer done

    Install Driver Using MediaTek USB VCOM drivers

    To manually install MediaTek USB VCOM drivers, you can follow this video:


    Flashing Stock Rom in SP Flash tool

    1. Download Latest SP Flash tool here and extract to your desired location.
    2. Open the extracted file folder and run flash_tool.exe
    3. On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
      flash tool choose file

    4. Follow the screenshot below in choosing android scatter file.

      Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.

      SP flash tool choose scatter
    5. After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.
      SP flash tool file loaded

    6. In your phone turn off first, or remove battery (if removable) because turn off is a must.

      In flash tool Select Download Only Then click Download button
      In your phone Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
      After you see detected proceed now to step 7.

        7. sp flash tool phone detect
        6.1 Some phone that has a Virus infected encounter this warning;
        PMT changed for the ROM; it must be downloaded. If you don’t see this warning just proceed to step 7.
        to solve this, just follow the suggestion, Please Select “Format All + Download” Scene and try again the step 6.

        SP flash tool PMT changed for the ROM

        SP flash tool PMT changed for the ROM format all

        SP flash tool PMT changed for the ROM formatting

      • You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.

        WARNING: Do not unplug or disconnect during this operation.SP Flash tool Downloading

      • And finally, it will popup a Download OK,  that means the flashing new firmware is successful.

        SP flash tool download ok

        Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
        NOTE: Starting up for the first time may took long.


      Troubleshooting

      FOR INVALID IMEI or Null IMEI

      After you flash new firmware and try to dial *#06# to check your IMEI you will see INVALID or null Just follow How to Fix/Solve Invalid IMEI in safest method.

      6 thoughts on “Tablet M706-MB-V5.2 MT6572 Tested Firmware No Password”

      1. boss bakit po ganun after ko ma flash ok nmn po at
        nag tuloy nmn kaya nga lang eh may password….
        pag nasa menu..d po kaya may password ung na backup at
        kung pwd narin malaman salamat po ng marami…..ung first firmware po ung ginamit ko (y)

      5. same board number M706-MB-V5.2 and board looks designed same as well but after flashing I power it on and it's backlight is on but blank screen i can hear the sound of the logo loading like it starting to load but blank screen backlight on..

      Comments are closed.