Here is the tested firmware also known as stock rom for your pop C7, this is confirmed tested by me and many expert technicians. it helps you to fix the following problem:
- Hang on logo
- Infected virus /Monkey test virus/ sexy virus
- Boot loop
- Unfirtunately stop
- deadboot but detected on PC
- or some other reason
Download Alcatel One Touch Pop C7 7040E Tested Firmware / Stock Rom
- Single link Alcatel One Touch Pop C7 7040E Firmware
- Multiple link Part 1, Part 2, Part 3, Part 4
NOTE: Use winrar to Extract firmware Just dowload all parts then highlights all then right click then extract here.
- Single link Alcatel One Touch Pop C7 7040E Firmware
- Multiple link Part 1, Part 2, Part 3, Part 4
How to flash Alcatel One Touch Pop C7 7040E
How to flash Android phone using SP Flash tool
What we need?
- PC
- Firmware/ROM, SP Flashtool and MTK Drivers
- USB Cable
- Smartphone with 30 to 50 percent battery charged
Driver Installation
Install Driver using Auto Installer Driver
- After you download and extract, open the folder and you will see Install.bat
- Run and it will appear Windows Security window
- Click Install this driver software anyway
- It will appear many times and just click the same button.
Install Driver Using MediaTek USB VCOM drivers
Flashing Stock Rom in SP Flash tool
- Download Latest SP Flash tool here and extract to your desired location.
- Open the extracted file folder and run flash_tool.exe
- On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
-
Follow the screenshot below in choosing android scatter file.
Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
-
After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.
-
In your phone turn off first, or remove battery (if removable) because turn off is a must.
In flash tool Select Download Only Then click Download button
In your phone Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
After you see detected proceed now to step 7. -
You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.
-
And finally, it will popup a Download OK, that means the flashing new firmware is successful.
Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
NOTE: Starting up for the first time may took long.
PMT changed for the ROM; it must be downloaded. If you don’t see this warning just proceed to step 7.
to solve this, just follow the suggestion, Please Select “Format All + Download” Scene and try again the step 6.
Master Invalid link yung single link fix Please? thanks
Fixed! thanks for informing
master di ko parin ma dlyung single link gamit ang idm pano po yun?
Obrigado funcionou perfeitamente, thanks.
try ko toh master
i follow the instruction but cant recognized the device always charging ..
Hola yo tengo la solucion
https://www.youtube.com/watch?v=nmQLMTlUFb0
mira este tutorial y apoyame
This comment has been removed by the author.
Hola yo tengo la solucion
https://www.youtube.com/watch?v=nmQLMTlUFb0
mira este tutorial y apoyame
THANKS SUCCESFUL
Master d gumagana un isang sim card slot
Master nagrerestart kasi yung phone lagi kaya ayaw ma detect nung pc
I need you to remember that these cell watches are similar as a vehicle, you can see every one of the photos and plugs however you will not genuinely like it until you have tried it out for yourself, really at that time would you be able to make any genuine appraisals. visit website
this website